Office     (04) 499-0010
 Fax        (04) 499-0040

 sales@csinz.com

Honeywell - 24VAC Thermostats - Commercial

New T7350 Commercial programmable thermostat

The T7350 Commercial Programmable Thermostat controls 24 Vac commercial single zone heating, ventilating and air conditioning (HVAC) equipment. The T7350 consists of a thermostat and sub base. The thermostat includes the keypad and display for 7-day programming. The sub base includes equipment control connections. The sub base mounts on the wall and the thermostat mounts to the sub base

Typically used in buildings (including: restaurants shopping malls, office buildings and banks) under 55,000 square feet. For single zone rooftop units, split systems, heat pumps or hot/chilled water systems.

Thermostat Interface Module (TIM) connections to thermostat from PDA for advanced configuration, programming, keypad lockout, etc. changes can be made with thermostat mounted.

Accessories:

  • Duct Discharge Air Sensors: C7041B (6 or 12 in.), C7041C (18 in.), C7041J (12 ft averaging), C7770A (8 in. probe).

  • Outdoor Air Sensors: C7089A, C7170A, C7031G2014 (weatherproof).

  • Temperature Sensors (Remote): C7772A, T7770A1006, T7770B1046, T7770C1044, T7770D1000, T7771.

  • Economizer Logic Modules: W6210, W6215, W7210, W7212, W7215, W7459.

  • Humidity Sensors: H7621A,B,C; H7631A,B,C.

  • PDA Units: Palm. V, M125, and i705 hand helds;

  • TRGPro. handheld; ZIRE. 71 handheld;

  • TUNGSTEN. T handheld.

Others:

  • 209651A Vertical Mounting Hardware Wall plate Adapter (Trident white).

  • 50000083-001 Thermostat Interface Module (TIM).

  • 50000314-001 PDA Configuration Software.

  • 50000452-001 Troubleshooting Cable.

T7350 Thermostats

Model Number

Switching

Electrical Rating

Range

Features

T7350A1004/U

Conventional or Heat Pump with base 1H/1C

24 VAC, 50/60 Hz.

Relays 1.5A @ 30 VAC

4 to 37°C

 

T7350B1002/U

Conventional or Heat Pump with base 2H/2C

24 VAC, 50/60 Hz.

Relays 1.5A @ 30 VAC

4 to 37°C

Outdoor, Discharge air capability

T7350D1008/U

Conventional or Heat Pump with base 3H/3C

24 VAC, 50/60 Hz.

Relays 1.5A @ 30 VAC

4 to 37°C

Humidity, Occupancy, Outdoor, Discharge air capability

T7350M

Due for release 2005

 

Conventional or Heat Pump with base

2 modulating & 2 relay outputs

24 VAC, 50/60 Hz.

Relays 1.5A @ 30 VAC

4 to 37°C

Humidity, Occupancy, Outdoor, Discharge air capability,

4-20 mA output (2-10 Vdc with 500 ohm resistor)

Advanced programmable thermostat for commercial applications

The T7300 thermostat controls single zone heating, ventilating and air conditioning equipment, when used with the appropriate Q7300 sub base.

It features 7day programming, 2 occupied / unoccupied periods per day, intelligent recovery (which will optimise the start time depending on the building load) as well as many other features.

 

T7300F Temperature Controllers

Model Number

Switching

Electrical Rating

Range

Features

T7300F2010

Full system switching

Fan on / auto

Heat 1.6A @ 24VAC

Cool 1.6A @ 24VAC

Fan  1.6A @ 24VAC

Aux 1.6A @ 24VAC

7 to 35°C

P + I control.

Auto changeover

Optional remote sensors.

Q7300 Sub-bases for T7300F

Model Number

Switching

Electrical Rating

Range

Features

Q7300A2016

for

Conventional heating

2 x heating

2 x cooling

Aux relay output

Heat 1.6A @ 24VAC

Cool 1.6A @ 24VAC

Fan  1.6A @ 24VAC

Aux 1.6A @ 24VAC

 

Remote sensor capability.

Discharge sensor capability.

2 x LEDs (conf)

Q7300A2057

for

Conventional heating

2 x heating

2 x cooling

 

Heat 1.6A @ 24VAC

Cool 1.6A @ 24VAC

Fan  1.6A @ 24VAC

 

 

Discharge sensor capability

Q7300C2012

for

2 x Compressor

systems

3 x heating

2 x cooling

 

Heat 1.6A @ 24VAC

Cool 1.6A @ 24VAC

Fan  1.6A @ 24VAC

 

 

Remote sensor capability.

Discharge sensor capability.

2 x LEDs (conf)

Remote Sensors for T7300

Model Number

Description

 

 

Colour

T7022A1010

Duct sensor

 

 

 

T7047C1165

Wall mount

(single sensor)

 

 

Beige

T7047G1018

Wall mount

(for averaging sensors)

 

 

Beige