MAMAC - Pipe Temperature Sensors
-
Four immersion thermowell installation options—brass adapter with 304SS probe for adjustable insertion, plastic, galvanized steel or NEMA-4/IP-65 steel enclosure. Four strap on surface mount installation options—rugged 304SS hermitically sealed probe, plastic, galvanized steel or NEMA-4/IP-65 contact surface temperature sensors offer the industry’s most extensive range to satisfy all HVAC, appliance and industrial applications.
-
304 SS thin wall probe with a cold rolled hermitically sealed end forms a monolithic encapsulation cavity for the sensor and is immune to failures caused by high humidity, contamination, thermal shock and vibration.
-
Fast response brass contact sensor for strap on applications is insulated from the enclosure to provide accurate pipe
-
More than 15 types of interchangeable NTC thermistors, precision platinum, nickel or balco RTD’s are available for universal compatibility.
TE 703/704 temperature sensors offer the industry’s most extensive
range of enclosure, installation and sensor types to satisfy all
HVAC, industrial and commercial applications. These revolutionary
sensors incorporate more than twenty five years of product
development and experience drawn from millions of installations
world wide in all types of applications. This product and process
design combined with automated manufacturing processes yields a
rugged, reliable, repeatable and stable temperature sensor at a low
cost. The only line of temperature sensors offering lifetime
warranty against moisture migration related failures. For large
volume OEM customers, TE-703/704 temperature sensors are available
in many custom configurations. Wire type, length or gage, terminals,
connectors, probe lengths, enclosures options or sensor types may be
customized based on volume.
SPECIFICATIONS:
Platinum RTD sensors: +/- 0.1% @ 0 C, Alpha : 385 per DIN 43760
Nickel RTD sensors: (#2) +/- 0.5 C @ 0 C, 5000 PPM/K T.C.R.
Nickel RTD sensors: (#4) +/- 0.5 F @ 70 F / 21.1 C, 6000 PPM/K T.C.R.
Balco RTD sensors: +/- 0.5 F @ 70 F /21.1 C, 4300 PPM/K T.C.R.
Thermistor sensors: +/- 0.2 C interchangeability @ 77 F/ 0 C
Probe Material: 1/4” / 6.3mm O.D, 0.020” / 0.5mm wall 304 Stainless Steel
Flange Material:
Galvanized Steel
Bulkhead Fitting: Brass with poly compression sleeve
Plastic Enclosure: Polycarbonate 30% glass filled, rated UL 94V-5-0
Steel NEMA-1 / IP-30: 18 Ga. Galvanized Steel
Steel NEMA-4 / IP-65: 18 Ga. Cold Rolled Steel, Powder coated
Operating Temp:
-40F/-40C to 210F/100C
Ambient Temp: -40F/-40C to 160F/70C
Warranty:
Five Years (Lifetime on Moisture Migration).
TE-703-A
Immersion Temperature Sensor
Thermowell Adapter Mount
Incorporate
a hermitically sealed 304 SS probe and a brass adapter with a
compression sleeve providing a rugged assembly for immersion
temperature sensing if field adjustable insertion depth is desired.
The brass adapter is screwed in to the thermowell, compression
sleeve is loosened, probe inserted to desired length and the sleeve
is tightened. Sensor has 6ft/1.8m plenum rated cable for remote
termination. TE-703-A sensors provide a cost effective and reliable
solution for hot/chilled water, condenser water or low pressure
steam applications which require adjustable insertion length.
TE-703-B Immersion Temperature Sensor
Polycarb Enclosure
Corrosion free 30% glass filled polycarbonate enclosure designed to
withstand temperature extremes, mechanical shock and vibration. 304
SS probe crimp attached to the enclosure for a low profile mating
surface. Patented locking thermowell adapter, single screw cover
attachment, are some of the features which improve reliability and
lower installation costs. TE-703-B sensors provide a cost effective
and reliable solution for hot/chilled water, condenser water or low
pressure steam applications.
TE-703-C Immersion Temperature Sensor
Galvanized Enclosure
Industry standard NEMA-1 / IP-30 galvanized sheet metal enclosure
designed for all industrial and commercial immersion temperature
sensing applications. Hermitically sealed, fast response 304 SS
probe crimp attached to the enclosure for a low profile mating
surface. Keyed enclosure cover to swing open without removing the
screws, 1/2" conduit opening, are some of the features which improve
reliability and lower installation cost.
TE-703-D Immersion Temperature Sensor
Powder Coated Steel Enclosure
Rugged steel enclosure with welded seams, gasketted cover and powder
coated finish, rated NEMA-4 / IP-65 for harsh environments. TE-703-D
has all other features including a 304 SS probe, conduit opening
similar to the TE-703-C series except designed for applications in
unconditioned environments where the unit maybe subjected to dirt,
condensation, oil vapor and other contaminants.
TE-704-A Surface Temperature Sensor
Strap On Probe
Incorporates a 2" 304 SS probe with a 6 ft/1.8m plenum rated cable
for pipe surface temperature sensing. Nylon ties are provided to
secure the probe to the pipe. TE-704-A provides a cost effective and
reliable solution for surface contact temperature measurement of
conditioned water pipes, low pressure steam or refrigerant lines.
TE-704-B Surface Temperature Sensor
Polycarb Enclosure
Corrosion free 30% glass filled polycarbonate enclosure
designed to withstand temperature extremes, mechanical shock and
vibration. Fast response brass contact sensor attached to the
enclosure for a low profile mating surface, mounting bracket for
pipe clamp installation, single screw cover attachment, are some of
the features which improve reliability and lower installation costs.
TE-704-C Surface Temperature Sensor
Galvanized Enclosure
Industry standard NEMA-1 / IP-30 galvanized sheet metal
enclosure designed for all industrial and commercial surface
temperature sensing applications. Fast response brass contact sensor
attached to the enclosure for a low profile mating surface. Keyed
enclosure cover to swing open without removing the screws, 1/2"
conduit opening, are some of the features which improve reliability
and lower installation cost.
TE-704-D Surface Temperature Sensor
Powder Coated Steel Enclosure
Rugged steel enclosure with welded seams, gasketted cover and powder
coated finish, rated NEMA-4 / IP-65 for harsh environments. TE-704-D
has all other features including a fast response brass contact
sensor, conduit opening similar to the TE-704-C series except
designed for applications in unconditioned environments where the
unit maybe subjected to dirt, condensation, oil vapor and other
contaminants.
ORDERING INFORMATION: TE-703
A
Immersion style With adapter
1
100 ohm Platinum RTD
A
4 inches/100mm
1
1/8" NPT
B Polycarb Plastic Enclosure
IP-54
2
1,000 ohm Nickel RTD (5000 PPM)
B
6 inches/150mm
2
1/4" NPT
C Galvanized Steel
Enclosure NEMA-1 / IP-30
3
1,000 ohm Platinum RTD
C
8 inches/200mm
3
1/2" NPT
D Painted Steel
Enclosure NEMA-4 / IP-65
4
1,000 ohm Nickel RTD (6000 PPM)
5 1,000 ohm Balco RTD
7
10,000 ohm NTC therm. (Type III)
8 10,000 ohm NTC therm. (Carel)
10
3,000 ohm NTC therm.
12
10,000 ohm NTC therm. (Type II)
13
5,000 ohm NTC therm.
14
1,035 ohm Silicon PTC
15
100,000 ohm NTC therm.
17
20,000 ohm NTC therm.
18
2,252 ohm NTC therm.
21
1,800 ohm NTC therm.
Example: TE-703-A-10-A-3:
Immersion style with 1/2" adapter, 3000 ohm thermistor and 4 inch
probe.
Example: TE-703-D-10-C-2:
NEMA-4 enclosure, 3000 ohm thermistor, 8 inch probe and 1/4" NPT
brass fitting.
ORDERING INFORMATION: TE-704
A
Surface Mount Strap-on
1
100 ohm Platinum RTD
B
Polycarb Plastic Enclosure IP-54
2
1,000 ohm Nickel RTD (5000 PPM)
C
Galvanized Steel Enclosure NEMA-1 / IP-30
3
1,000 ohm Platinum RTD
D
Painted Steel Enclosure NEMA-4 / IP-65
4
1,000 ohm Nickel RTD (6000 PPM)
5 1,000 ohm Balco RTD
7
10,000 ohm NTC therm. (Type III)
8
10,000 ohm NTC therm. (Carel)
10 3,000 ohm NTC therm.
12
10,000 ohm NTC therm. (Type II)
13
5,000 ohm NTC therm.
14
1,035 ohm Silicon PTC
15
100,000 ohm NTC therm.
17
20,000 ohm NTC therm.
18
2,252 ohm NTC therm.
21
1,800 ohm NTC therm.
Example: TE-704-C-1:
NEMA-1 enclosure with 100 ohm Platinum RTD surface mount sensor.
* For sensor compatibility, please refer to TI.700-10.