MAMAC - Sensor Only Enclosure Options
EXECUTIVE
· Attractive,
off-white finish, made from rugged ABS plastic.
· Mounts
on standard 2”X4” junction box.
· Rugged
two-piece construction, cover secured to sub base via Allen
screws.
· Superior
cover and wall plate design minimize error due to thermal mass
effect from
the building wall and maximize required airflow across sensor
element.
· Features
rising cage type screw terminations.
· Specify
sensor.
MICRO
· Small
package… ideal for areas where
· inconspicuous
use is required.
· Attractive,
tan finish, made from rugged ABS plastic.
· Features
rising cage type screw terminations.
· Specify
sensor.
STANDARD
· Attractive,
tan finish, made from rugged ABS plastic.
· Features
rising cage type screw terminations.
· Specify
sensor.
STAINLESS STEEL
· Rugged,
tamper-proof stainless steel construction
· Features
rising cage type screw terminations.
· Specify
sensor.
SENSOR ONLY
· Ideal
for use in any case style or size. Simple secure the sensor in
the selected case.
· Features
rising cage type screw terminations.
· Specify
sensor.
|
ORDER |
ENCLOSURE TYPE |
ORDER |
SENSOR TYPE |
ORDER |
TE205EX ONLY |
|
TE 205 M |
MICRO ENCLOSURE |
1 |
100-Ω platinum RTD |
||
|
TE 205 P |
STAINLESS STEEL ENCLOSURE |
3 |
1,000-Ω platinum RTD |
||
|
TE 205 G |
SENSOR ASSEMBLY ONLY |
4 |
1,000-Ω nickel RTD |
||
|
TE 205 A |
STANDARD ENCLOSURE |
5 |
1,000-Ω Balco RTD |
||
|
|
|
7 |
10,000-Ω NTC thermistor |
|
|
|
10 |
3,000-Ω NTC thermistor |
||||
|
12 |
10,000-Ω NTC thermistor |
||||
|
13 |
3,000-Ω NTC thermistor |
||||
|
15 |
100,000-Ω NTC thermistor |
||||
|
TE 205 EX |
EXECUTIVE ENCLOSURE |
17 |
20,000-Ω NTC thermistor |
||
|
|
|
18 |
2,252-Ω NTC thermistor |
||
|
21 |
1,800-Ω NTC thermistor |
0 |
Required to order TE 205 EX only |
ORDERING EXAMPLES:
TE 205 M P G A
Select ENCLOSURE TYPE order designator and SENSOR TYPE order designator. For example, a TE 205 M 10 is a
MICRO ENCLOSURE enclosure type with TYPE 10 3,000Ω sensor.TE 205 EX
Select TE 205 EX enclosure designator. Select SENSOR TYPE order designator. Add -0. For example, a TE 205 EX 10 0 is an EXECUTIVE ENCLOSURE enclosure type with TYPE 10 3,000Ω sensor, and -0 designating sensor only option.
SPECIFICATIONS:
-
Platinum RTD sensor: ± 0.1% @ 32.0º F (0.0º C), Alpha: 385 per DIN 43760
-
Thermistor sensor:
Operating and Storage Temperatures: 32.0º F to 158.0º F (0.0º C to 70.0º C)
Finish: Off-white, Tan, ABS plastic; Stainless steel
GENERAL INSTALLATION INSTRUCTIONS:
Inspection:
Inspect the package and device for obvious signs of damage. If
damaged, please notify your shipper.
To Get Started:
Tools are not provided. You will need a drill, drill bits, or a
screwdriver and screws to mount this device. Sheet rock mounting:
two (2) appropriate #8 screws and plastic wall anchors required.
Standard 2 X 4” electrical box: two (2) appropriate #8 screws.
Mount the Sub base (Fig 2-5) or Wall Module (Fig 6):
Mount sub base or wall module approximately
five (5) feet above floor level. Pull wires through junction box or
through hole in sheet rock through hole in the back of the sub base.
Use the cover or the sub base as a template to mark screw holes.
Mount the sub base on the sheet rock or junction box.. Screw down
the sub base or wall module. Replace the cover, screw down Allen
screws, if provided for your model..
Terminations:
Use no larger than 12 AWG wiring.
SUBBASE AND SENSOR ENCLOSURE REPRESENTATIONS AND DIMENSIONS:
(for third dimension, see below)
